Support

Need Help Using The App?

Check out our guides on getting started or the in-depth guides for advanced usage of Photone.

Frequently Asked Questions

How do I use Photone? Where do I start?
If you don't know how much light your plant needs, start with the guide on optimal plant lighting.

If you already know which numbers to look for and want to learn how to start measuring, check the guide on measuring light with Photone.
How accurate is Photone?
When used correctly, Photone is as accurate as professional-grade PAR meters. If you don't measure what you'd expect and thus think the app is inaccurate, read the guide on common mistakes.

More information on accuracy and sample measurements can be found in the comparison of all light meter apps.
Does a screen protector impact the readings?
Screen protectors with a notch or hole for the camera don't affect measurements.

Protectors covering the front camera do block a very small fraction of the light, but the impact is negligible: in our tests, readings were roughly 1% lower. As we can't test every brand, measure under stable lighting with and without your protector if you want to be absolutely sure. Should it make a difference, use the in-app calibration options to compensate for it.
Do I need to calibrate?
Calibration is always optional.

If Photone includes a default calibration for your device, it will measure light intensity using the front camera which is very accurate. In that case, the only reason to calibrate would be to align Photone's reading to another meter.

If no default calibration is available, Photone will fall back to using the built-in ambient sensor (ALS) for light intensity measurements. Since ALS are known to be inaccurate, calibration might be an option for you. However, you should only calibrate if you think your measurements are off and with a reference you trust (e.g. the spec sheet of your grow light, or another meter) at hand.

Pressing Calibrate Photone within settings (⚙️-icon on the top right) will indicate if your device has a default calibration (look for the ✅-icon) or not.

Follow this guide for detailed instructions on how to calibrate.
How much light does my plant need?
We've made it easy for you to get started by putting all you need to know in the guide on optimal plant lighting. Have a look ☺️
Which light source setting do I need?
To ensure you get accurate readings you should select the type of light source you're measuring. This will allow Photone to correct the spectral mismatch error. If you don't know which light source setting you should pick, simply follow the guide on which setting to choose.
Why is Photone only using the front (selfie) camera?
Photone uses the front camera to measure the light that falls onto your plants whilst allowing you to read the measurement. Using the rear/back camera (i.e. filming your plants) would measure light reflected off your plants.

To learn how Photone works and how you can accurately measure light intensity check out this guide.
Why doesn't the Photone app show any measurement values?
Photone showing no values If no measurement values appear, it means your device's camera or built-in ambient light sensor (ALS) isn't responding due to an operating system issue. This may happen after an iOS/Android update or due to an error within the operating system.

To fix the issue try:
1) Fully close the app and then open it again (how to close an app on iPhone) or if that doesn't help …
2) Restart your device (how to restart an iPhone).

Please contact our support if that didn't fix it.
What is a diffuser?
A diffuser is a translucent (semi-transparent) appliance that scatters and disperses light evenly. Every light meter requires one to ensure the sensor is illuminated equally and is thus able to obtain accurate measurements.
Do I need a diffuser?
A diffuser is required whenever Photone uses the camera for highly accurate light intensity measurements. This requires a default calibration for your device model.

🍏 iPhone/iPad (Apple)
Photone provides a default calibration for every iPhone and iPad. Therefore, measurements are always camera-based — and a diffuser is required.

🤖 Android (Samsung, Google, Xiaomi, OPPO, etc.)
It depends on your specific device: If there is a default calibration available, Photone will measure with the camera. Then you need a diffuser. Else Photone will fall back to using the device's built-in ambient light sensor (ALS) for light intensity measurements which doesn't need a diffuser because each ALS already has a tiny diffuser built in. However, measurements using the ALS will be less accurate (learn more).

What should you do?
Simply follow the in-app instructions and start measuring. Photone will immediately tell you whether a diffuser is required by displaying either a 'Diffuser Required' or a 'Please Remove Diffuser' notice.
Why do I need a diffuser?
The diffuser is the most complex part of our app and what confuses people the most. Unfortunately, the physics of light measurement don't allow us to make it any simpler. All we can do is explain it as simply as possible. Here's the gist:

To measure light accurately on a smartphone, we have to use the camera. Read here why we don't rely on the built-in ambient light sensor (ALS).

When measuring light with the camera, a diffuser is required for two reasons: 1) it evens out the light reaching the sensor and prevents hot spots, and 2) it collects light from all angles. No camera-based light meter can work without one — apps that claim otherwise yield extremely inaccurate results.
How or where do I get a diffuser?
You have two options:
1) Build one yourself for free from standard printer paper in less than a minute (here's how).
2) If you want the best possible accuracy and a better usability: get the dedicated diffuser accessory.
How do I make a paper diffuser?
All you need is standard white printer paper with a weight of 80 g/m² (gsm) or 22 lb, scissors and some tape. Then pick one of two ways — we recommend the first:
1) Taped piece (simplest): Cut a piece of about 3 × 1.5 cm (1.5 × 0.5 in) and tape it over the front camera as shown in the picture below.
2) Paper loop: Wrap a strip of about 1.5 cm (0.5 in) width around your phone so it covers the front camera (instruction video). It easily slides off and back on, but doesn't hold nicely on a phone with a case. Paper diffuser taped over the front camera Most important: the paper must lie flush on the display. Any gap between paper and screen changes the reading.

If you live in the US we recommend using HP All-In-One (Amazon) or Pen+Gear Copy Paper (Walmart) ← even though this one's 20 lb its transmission is just like 22 lb, so it works fine.

Can't get 80 gsm paper? Use the white printer paper you have and calibrate Photone against a reference you trust. We can't provide a correction factor for other papers, as every paper lets a different amount of light through.

Don't like tinkering? Get the official diffuser accessory instead — for the best possible accuracy and a better usability. Diffuser accessory clipped onto the front camera
Is Photone a free app?
Yes. You can download and use Photone for free — without any ads!

For accurate measurements of specific light sources, you can unlock additional light sources with a one-time purchase (lifetime access).
Pro features are available either through a subscription (cancel anytime) or as a one-time lifetime unlock.

Read more about this on our pricing page.

Note: You'll never be charged without explicitly confirming your purchase. Every purchase helps us maintain and improve Photone while keeping it accurate and ad-free.
Why do I need to pay for extra features?
You don't have to — Photone provides useful functionality for free, and many users are happy with that (read more on app pricing).

If you choose to upgrade, you're supporting the ongoing development of a highly specialized and accurate tool. Unlike typical apps, achieving reliable light measurements requires extensive work: we measure and calibrate each supported device model individually to ensure accuracy.

Compared to traditional handheld PAR meters, Photone offers significantly more features and guidance at a much lower cost. Compared to other apps, Photone is the only one that's actually accurate.

“If you're not paying for it; you are the product” — not with us. Photone does not rely on selling or sharing your data with third parties to show customized ads. Paid upgrades help us maintain this approach so you don't become the product. Additionally, as a member of 1% for the Planet, we pledge 1% of all our sales to support environmental initiatives (read more on our commitment).
I have a new device or reinstalled the app. What happened to my previous purchases?
Previous purchases are valid as long as you keep using the same Apple or Google Account. Restoring any previous purchases is handled by the app automatically.
Do my purchases carry over when I switch between Android and iOS?
No, Apple and Google don't share purchases with each other. Photone doesn't keep user accounts (we have no record of who's using our apps). Every purchase belongs to the Apple or Google Account you made it with and is available on every device using that account forever.

A Pro subscription you can simply cancel on one platform and start again on the other.

If you bought Pro Lifetime and switch platforms contact our Pro Email-support and we'll find a solution.
How can I restore purchases?
Purchases restore automatically when you open the app, as long as you're signed in with the same Apple or Google account you bought them with.

On Apple, you can also restore manually:
1. Verify that you're using the Apple Account originally used for the purchase. You can check this under Settings → [Your Name] → Media & Purchases.
2. Open the light source selection (1).
3. Tap to open the light source inventory (2).
4. Scroll to the bottom and tap “Restore Purchases” (3).

How to restore Photone purchases
I bought something on Google Play but it's still locked in Photone. What can I do?
First, check whether the purchase shows up in your Google Play purchase history.

If it isn't listed there, the purchase either never completed, or it was made with a different Google Account. Look for the order confirmation email Google Play sent you — it names the account the purchase belongs to.

If it is listed there but Photone still shows the feature as locked, you've run into a quirk of Google Play that catches a lot of people:

Google Play only reports to an app the purchases of the account that was used to download that app — not the account you happen to be signed in with now. So if you have more than one Google Account on your phone, and Photone was downloaded with one while the purchase was made with the other, Photone will never see it. Switching the account in the Play Store doesn't help on its own, because the existing installation stays tied to the account it was downloaded with.

To fix it:
1. Find the account that made the purchase. Quickest way: the order confirmation email from Google Play. Alternatively, open the Play Store, tap your profile picture (top right) and go to Payments & subscriptions → Budget & history.
2. Uninstall Photone. Nothing is lost — your purchase is stored in your Google Account, not in the app.
3. Switch accounts and re-download. In the Play Store, tap your profile picture, switch to the account from step 1, then install Photone again with that account active.
4. Open Photone. Your purchase is restored automatically within a few seconds.

Step 2 is the one that's easy to skip — and the one that makes the difference, because only a fresh download ties the app to the right account.
I bought something on the App Store but it's still locked in Photone. What can I do?
On Apple devices, purchases belong to the Apple Account set under Settings → [Your Name] → Media & Purchases — which isn't necessarily the same account you use for iCloud. That's the most common reason a purchase doesn't show up.

1. Check the account. Open Settings → [Your Name] → Media & Purchases → View Account and confirm this is the Apple Account you bought with. If it isn't, sign out and sign in with the right one.
2. Restore. Open Photone and restore your purchases manually.
3. Verify the purchase went through. Your Apple purchase history shows every App Store purchase and which account it belongs to.

You don't need to reinstall the app — switching the account under Media & Purchases and restoring is enough. And purchases follow the account, not the device, so a new iPhone or iPad picks them up automatically once you're signed in with the same Apple Account.

Please note that in-app purchases in Photone are not shared through Family Sharing — a purchase made on a family member's Apple Account won't unlock anything on yours.
How can I change the billing period of my Photone Pro subscription?
If you want to change from a subscription to a lifetime license, you have to cancel your subscription first and then purchase the lifetime license once the subscription runs out.

Swapping the billing period of the Photone Pro subscription is also possible, but it depends on your device's operating system:
🤖 On Android devices, you need to cancel your currently active subscription and then re-subscribe with a different plan.
🍏 On Apple devices, open the Settings app, tap your name, then tap Subscriptions. This support article explains the steps in more detail.
How do I cancel my Photone Pro subscription?
The Photone Pro subscription can be canceled at any time like any other subscription.

🤖 On Android devices, you can open the Play Store app, select your profile, then tap on 'Payment and subscriptions' or manage your subscriptions by following this link.

🍏 On Apple devices, open the Settings app, tap your name, then tap Subscriptions or manage your subscriptions by following this link.
Why is Photone Pro a subscription?
You might wonder why your light meter offers a subscription. Here's why:
  • Try before committing: By subscribing for a month you can see if actually need the features provided. Cancel or Upgrade anytime.
  • More Features: Photone offers a wide range of features that go beyond what a handheld meter can provide.
  • Continuous Improvements: The app is constantly updated with new features and enhancements, ensuring you always have the best tools at your fingertips.
  • Support New Devices: We continuously update Photone so you get reliable, accurate measurements on both the newest flagship devices and older models.
  • Durability and Convenience: Unlike a handheld meter, Photone can't break. Simply install it on your new device and keep using it without any hassle.
  • Dedicated Support: Your subscription includes access to Pro customer support, helping you make the most of Photone.
  • Sustainable Development: Subscriptions provide us with a more consistent revenue stream, enabling ongoing research, development, and maintenance to keep Photone cutting-edge.

Don't like subscriptions? All upgrades are also available as a one-time purchase with a lifetime license. Read more on our pricing here.
What features do I unlock with Photone Pro?
With Photone Pro, you unlock a range of advanced features — great if you're serious about plant lighting:
  • 💡 All Grow Lights: Unlock all light source settings used for plant lighting.
  • 📊 ePAR: Measure the extended PAR range from 400 to 750 nm with ePAR readings.
  • 🛠️ Pro Settings: Unlock a wide range of advanced settings.
  • 💬 Pro Support: Get help from a real human with any questions about the app.
  • 🧰 Toolbox Unlocked: Get rid of the heatmap watermark, create up to 2000 logs and export to Excel (see all toolbox features).
  • 📖 Pro Guides: Access detailed guides for houseplants, medical cannabis, and coral lighting.
  • 🌡️ Color Temperature (CCT): Measure the correlated color temperature of any light source in Kelvin.
  • ⌚ Watch Connectivity*: Take measurements in hard-to-reach or confined spaces and view results directly on your Apple Watch.

* Available on iOS only.
Can Photone measure underwater?
Yes, Photone can be used for sweet- and saltwater measurements. Learn more about underwater measurement accuracy and how to prepare Photone to do so.
DLI, PAR, PPFD, lux, fc ... what do these values mean?
Tap the (i) icon above each measurement on the Photone main screen to learn about the currently displayed measurement: Photone PAR Meter measurement For more in-depth information read about the difference between PPFD and lux on our blog or check the grow light metrics cheatsheet that explains all possible abbreviations used in plant lighting.
Why do I need to select the light source?
Choosing the correct light source allows Photone to compensate for what's called spectral mismatch (f1' as defined in ISO/CIE 19476). Photone light source setting selection Without this correction, measurements can be significantly off depending on the type of light.

Each light source (e.g. sunlight, LED, fluorescent) has a different spectral power distribution (often just called spectrum), and your device's sensor responds differently across wavelengths. Photone accounts for this by automatically applying a correction factor based on: the spectral responsivity of your device's sensor, selected light source, diffuser type, and measurement mode.

We measure the spectral responsivity and calibrate the app for every supported device and diffuser combination. This process is complex, but it's a key reason why Photone can deliver accurate results. For Android devices that fall back to the built-in ambient light sensor (ALS), the spectral responsivity is assumed to model the luminous efficiency function of the human eye, V(λ), as specified in ISO/CIE 19476.

Check the guide on choosing the correct light source for more information.
My readings are way off. Why?
When used correctly, Photone has the same accuracy as a professional PAR meter. Please consider reading the guide on common mistakes.
Why is the measurement not stable?
It's normal for readings to fluctuate slightly, even if your device is placed in a fixed position without being touched. Light intensity is never perfectly constant: sunlight varies all the time due to clouds and changing atmospheric conditions — even on a clear day. Artificial light sources also fluctuate, since their output can change as they heat up during use. Photone is very sensitive and will detect all those little changes.

However, if your readings swing more noticeably but still circle around the same value (sometimes higher, sometimes lower), the cause may be flickering. This often happens when a lamp is directly powered by the grid or when using a cheaper power supply with pulse-width modulation (PWM). In this case, enable Advanced Readings in the settings and use the average value for a more stable result.
How can I measure multiple different light sources?
If you wish to measure the combined light intensity of multiple light sources of a different type, measure each light source type individually using the corresponding setting. Then sum up the measurements to get the resulting total light intensity.
Can Photone measure the spectrum of a light?
No. The spectral power distribution (SPD), which represents the different wavelengths (colors) of light, can only be measured with a spectrophotometer (optical spectrometer) — not with a light meter or a camera. Any app claiming to offer this feature without requiring an additional optical accessory is simply not telling you the truth.
Can I use the app on multiple devices?
Yes, you may use Photone on multiple devices simultaneously. Eventual purchases are available on all devices sharing the same Apple or Google Account. If purchased items aren't available, you may restore them.
Is Photone available in other languages?
Photone offers different languages to select right within the app Yes, Photone is available in other languages. This currently includes English, Spanish, German, French, Portuguese, Russian, Japanese and Chinese. Let us know if you'd like any other language.

Didn't find an answer? Ask us and other growers in our Reddit community r/Photone!

Ask on Reddit Contact Support